The Scutching Room
Click here to return to the Heritage Centre Index
What is scutching and why did it need a room with a crane?
Initially cotton bales were brought to the mill by canal boat being unloaded at Butts Basin and brought into the mill using the winch you see above.
Once lifted into the room, before cotton can be processed it has to be cleaned of its seeds and other impurities, which in the early days was done by spreading the raw cotton on a mesh and beating it with sticks, a process known as willowing or batting.
Scutching was the first stage of the spinning process and was where cotton bales were brought into the mill to be broken up and prepared for the later phases of spinning.
The scutching machine passes the cotton through a pair of rollers, then strikes it with iron or steel bars called beaters.
The beaters, which turn very quickly, strike the cotton hard and knock the seeds out. This process is done over a series of parallel bars, allowing the seeds to fall through. At the same time air is blown across the bars, which carries the cotton into a cotton chamber. The end result is a continuous sheet of cotton, ready for the next stage of the production process, carding.
We have a series of cards in the Scutching Room which provide more detail on the scutching and carding processes. We've also got scanned copies below for you to read online if you wish.
Here are some more images of the carding machinery at Spinners Mill.